# Properly defining a roller shade fabric as 	a TRANS material type

**URL:** <https://discourse.radiance-online.org/t/properly-defining-a-roller-shade-fabric-as-a-trans-material-type/1851>\
**Category:** radiance-general\
**Created:** [January 21, 2010, 6:59pm UTC](https://discourse.radiance-online.org/t/properly-defining-a-roller-shade-fabric-as-a-trans-material-type/1851 "2010-01-21T18:59:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rob\_Guglielmetti2](https://discourse.radiance-online.org/user_avatar/discourse.radiance-online.org/rob_guglielmetti2/32/468_2.png) [@Rob\_Guglielmetti2](https://discourse.radiance-online.org/u/Rob_Guglielmetti2)\
**Post date:** [January 21, 2010, 6:59pm UTC](https://discourse.radiance-online.org/t/properly-defining-a-roller-shade-fabric-as-a-trans-material-type/1851/1 "2010-01-21T18:59:18Z")

</div>

Hi Kyle,

I am not at all the materials measurement/definition guru on this list,  
but I do have some comments. First off, you should not use .03 for  
specular transmittance based on the openness factor. You should specify  
the transmittance. Have a look at the product specs for the shadecloth;  
somewhere there should be a reporting (however roughly it may have been  
estimated) for the transmittance of the shade.

Next, even though in theory the holes are allowing light to pass straight  
through, there will be some scattering at that interface due to the weave  
(especially in the case of your white colored shade), so there will be  
some diffuse component to this material. And therein lies the rub:  
figuring out how much of a diffuse component...

I recommend finding out the transmittance of the cloth, and than taking  
some fraction of that and putting that into the diffuse transmittance  
portion of the material definition. For example, if the shade has a  
transmittance of 20%, maybe specify Td = .05 and Ts = .15. I'd also  
recommend getting a sample; even if you can't measure it, you could at  
least observe it under different lighting conditions and then mix and  
match Td and Ts until you achieve L^ar (looks about right). =8-)

- Rob

> **···**
>
> On Thu, January 21, 2010 10:45 am, kkonis@berkeley.edu wrote:
> 
> > Dear list,
> > 
> > I am trying to describe a nominally "white" roller shade fabric with a  
> > 3% openness factor as a trans material type.
> > 
> > I don't have a real fabric on hand to measure, I'm just trying to make  
> > sure i understand the material definition parameters and then to do  
> > some studies varying the openness factor of a hypothetical woven  
> > roller shade material.
> > 
> > 1) I'm curious to know if by setting parameter A7 to 1 i am achieving  
> > my desired goal of representing a shading fabric that acts as an  
> > opaque sieve (e.g. a cheese-grater: light passes only through the 3% of  
> > the surface  
> > which is void  
> > (my interpretation is that diffuse transmission requires some portion  
> > of incident light to pass through the threads)
> > 
> > -any comments on the below process and resulting trans description  
> > would be appreciated.......
> > 
> > # USING THIS FORMULA from RWR and previous email discussions:
> > 
> > for the trans material:  
> > A7=Ts / ( Td+Ts )  
> > A6=( Td+Ts ) / ( Rd+Td+Ts )  
> > A5=Sr  
> > A4=Rs  
> > A3=Cb / ( (1-Rs)\*(1-A6) )  
> > A2=Cg / ( (1-Rs)\*(1-A6) )  
> > A1=Cr / ( (1-Rs)\*(1-A6) )
> > 
> > # INPUTS
> > 
> > Td = 0 # ASSUME no diffuse transmission (e.g. fabric threads are  
> > totally opaque)  
> > Ts = 0.03 # ASSUME that (3% openness factor of shade  
> > "weave")  
> > means fraction of light transmitted as beam (e.g. not scattered  
> > diffusely) = 0.03  
> > Sr = 0  
> > Rs = 0  
> > Cb = 0.7 # Nominally "white" fabric surface (reflects 70%  
> > of  
> > incident visible light?)  
> > Cg = 0.7  
> > Cr = 0.7
> > 
> > # CALCS
> > 
> > A7 = (0.03) / (0 + 0.03) = 1  
> > A6 = (0 + 0.03) / (0.7 + 0 + 0.03) = 0.0411  
> > A5 = 0  
> > A4 = 0  
> > A3 = 0.7 / ( (1 - 0)\*(1-0.0411) ) = 0.73  
> > A2 = 0.7 / ( (1 - 0)\*(1-0.0411) ) = 0.73  
> > A1 = 0.7 / ( (1 - 0)\*(1-0.0411) ) = 0.73
> > 
> > # RESULT
> > 
> > void trans my\_shade  
> > 0  
> > 0  
> > 7 0.73 0.73 0.73 0 0 0.041 1
> > 
> > thanks,
> > 
> > Kyle Konis  
> > PhD Student  
> > UC Berkeley
> > 
> > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > Radiance-general mailing list  
> > Radiance-general@radiance-online.org  
> > [http://www.radiance-online.org/mailman/listinfo/radiance-general](http://www.radiance-online.org/mailman/listinfo/radiance-general)
> 
> ===================  
> Rob Guglielmetti
> 
> > **[rumblestrip.org](http://www.rumblestrip.org)**
> >
> > My WordPress Blog

---

<div class="post-metadata">

**Author:** ![Rob\_Guglielmetti2](https://discourse.radiance-online.org/user_avatar/discourse.radiance-online.org/rob_guglielmetti2/32/468_2.png) [@Rob\_Guglielmetti2](https://discourse.radiance-online.org/u/Rob_Guglielmetti2)\
**Post date:** [January 21, 2010, 7:21pm UTC](https://discourse.radiance-online.org/t/properly-defining-a-roller-shade-fabric-as-a-trans-material-type/1851/2 "2010-01-21T19:21:11Z")

</div>

You're right Chris, at least that is probably a good starting point.

> **···**
>
> On Thu, January 21, 2010 12:10 pm, Christopher Rush wrote:
> 
> > I would have guessed if your total measured transmission was 20%, and  
> > you know the openness is 3%, the 3% would correspond to specular  
> > transmission and the other 17% must be diffuse transmission, no?
