# lightpipes/ports

**URL:** <https://discourse.radiance-online.org/t/lightpipes-ports/3658>\
**Category:** radiance-general\
**Created:** [January 14, 2006, 2:21am UTC](https://discourse.radiance-online.org/t/lightpipes-ports/3658 "2006-01-14T02:21:56Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Erico\_Rosa](https://discourse.radiance-online.org/letter_avatar_proxy/v4/letter/e/e79b87/32.png) [@Erico\_Rosa](https://discourse.radiance-online.org/u/Erico_Rosa)\
**Post date:** [January 14, 2006, 2:21am UTC](https://discourse.radiance-online.org/t/lightpipes-ports/3658/1 "2006-01-14T02:21:56Z")

</div>

I'm running a simulation on hollow mirror lightpipes and I've installed  
the photon map compiled by Carsten Bauer (at  
\<[http://www.cb-d.de/pmap/pmap.html](http://www.cb-d.de/pmap/pmap.html)\> [http://www.cb-d.de/pmap/pmap.html](http://www.cb-d.de/pmap/pmap.html))  
for Radiance 3.6. I also downloaded the examples from  
\<[mailto:ganjatron@gmx.net](mailto:ganjatron@gmx.net)\> Roland Schregle's webpage (  
\<[http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html](http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html)\>  
[http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html](http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html))  
to run a "test drive". The Photon Map runs all scripts without any  
problems until I use the examples with "ports". It falls into what seems  
a loop where the progress reports give me an exorbitant 30,000% (it's  
still running.). Will it stop eventually?

Does anybody have worked with the ports option and bumped into this  
abnormal behaviour?

Erico  
erosa@gsd.harvard.edu

---

<div class="post-metadata">

**Author:** ![Jan\_Wienold1](https://discourse.radiance-online.org/letter_avatar_proxy/v4/letter/j/ecc23a/32.png) [@Jan\_Wienold1](https://discourse.radiance-online.org/u/Jan_Wienold1)\
**Post date:** [January 14, 2006, 6:29am UTC](https://discourse.radiance-online.org/t/lightpipes-ports/3658/2 "2006-01-14T06:29:50Z")

</div>

Hi Erico,

you probably should use the current version of photon-mapping(4.3), which is for the RADIANCE 3.7. Roland made this new version some weeks ago.  
I'm not sure, if this helps in your special case, but I never had such problems with using photon-ports and I used it several times without any problems (I always used the 3.28 version for RADIANCE 3.5).

We are actually reorganizing our web-pages and unfortunately the English (web)version is not available and the German version shows a bug in direct linking. That's the reason, why I haven't posted it to the community yet.

Anyhow, it is already on a Web-page for downloading.  
You can get it on:  
[http://www.ise.fraunhofer.de/german/fields/field6/mb4/index.html](http://www.ise.fraunhofer.de/german/fields/field6/mb4/index.html) then follow link on "Lichtsimulation", then "RADIANCE", then "p-map"

Good luck!

Jan

Erico Rosa wrote:

> **···**
>
> > I'm running a simulation on hollow mirror lightpipes and I've installed the photon map compiled by Carsten Bauer (at [http://www.cb-d.de/pmap/pmap.html\](http://www.cb-d.de/pmap/pmap.html%5C)) for Radiance 3.6. I also downloaded the examples from Roland Schregle \<mailto:ganjatron@gmx.net\>'s webpage ([http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html\](http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html%5C)) to run a "test drive". The Photon Map runs all scripts without any problems until I use the examples with "ports". It falls into what seems a loop where the progress reports give me an exorbitant 30,000% (it's still running...). Will it stop eventually?
> > 
> > Does anybody have worked with the ports option and bumped into this abnormal behaviour?
> > 
> > Erico
> > 
> > erosa@gsd.harvard.edu
> > 
> > ------------------------------------------------------------------------
> > 
> > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > Radiance-general mailing list  
> > Radiance-general@radiance-online.org  
> > [http://www.radiance-online.org/mailman/listinfo/radiance-general](http://www.radiance-online.org/mailman/listinfo/radiance-general)
> 
> --  
> Dipl.-Ing. Jan Wienold  
> Project Manager  
> Fraunhofer-Institut f�r Solare Energiesysteme  
> Thermal Systems and Buildings, Lighting and Daylighting  
> Heidenhofstr. 2, 79110 Freiburg, Germany  
> Phone: +49(0)761 4588 5133 Fax:+49(0)761 4588 9133  
> jan.wienold@ise.fraunhofer.de
> 
> > **[Fraunhofer ISE](https://www.ise.fraunhofer.de/)**
> >
> > Forschen für die Energiewende
> 
> In office: Mo,Tue: 9:00-18:00  
> We-Fr: 8:30-14:00

---

<div class="post-metadata">

**Author:** ![Erico\_Rosa](https://discourse.radiance-online.org/letter_avatar_proxy/v4/letter/e/e79b87/32.png) [@Erico\_Rosa](https://discourse.radiance-online.org/u/Erico_Rosa)\
**Post date:** [January 14, 2006, 6:24pm UTC](https://discourse.radiance-online.org/t/lightpipes-ports/3658/3 "2006-01-14T18:24:51Z")

</div>

Hi Jan,

Thanks for the pointer. I've downloaded the pmap 4.3 version and tried  
to compile/install (after performing a fresh installation of radiance  
3.7), but the pmap installation is unsuccessful, with the following  
error messages being generated by 'makeall install' during the  
compilation:

../lib/libpmap.a(pmapmat.o)(.text+0xf64): In function  
`anisoSpecPhotonScatter':  
: undefined reference to `getacoords'  
../lib/libpmap.a(pmapmat.o)(.text+0x1afb): In function  
`dielectricPhotonScatter' :  
: undefined reference to `mylog'  
../lib/libpmap.a(pmapmat.o)(.text+0x1b26): In function  
`dielectricPhotonScatter' :  
: undefined reference to `mylog'  
../lib/libpmap.a(pmapmat.o)(.text+0x1b51): In function  
`dielectricPhotonScatter' :  
: undefined reference to `mylog'  
../lib/libpmap.a(pmapmat.o)(.text+0x1db1): In function  
`dielectricPhotonScatter' :  
: undefined reference to `mylog'  
../lib/libpmap.a(pmapmat.o)(.text+0x1dd9): In function  
`dielectricPhotonScatter' :  
: undefined reference to `mylog'  
../lib/libpmap.a(pmapmat.o)(.text+0x1e01): more undefined references to  
`mylog' follow  
collect2: ld returned 1 exit status  
make: \*\*\* [mkpmap] Error 1  
make: Target `install' not remade because of errors. ~/rad3R7/ray/src

Do you have any idea of what might be causing this?

Thanks in advance,

Erico

> **···**
>
> -----Original Message-----  
> From: Jan Wienold [[mailto:jan.wienold@ise.fraunhofer.de](mailto:jan.wienold@ise.fraunhofer.de)]  
> Sent: Saturday, January 14, 2006 1:30 AM  
> To: Radiance general discussion  
> Subject: Re: [Radiance-general] lightpipes/ports
> 
> Hi Erico,
> 
> you probably should use the current version of photon-mapping(4.3),  
> which is for the RADIANCE 3.7. Roland made this new version some weeks  
> ago.  
> I'm not sure, if this helps in your special case, but I never had such  
> problems with using photon-ports and I used it several times without any  
> problems (I always used the 3.28 version for RADIANCE 3.5).
> 
> We are actually reorganizing our web-pages and unfortunately the English  
> (web)version is not available and the German version shows a bug in  
> direct linking. That's the reason, why I haven't posted it to the  
> community yet.
> 
> Anyhow, it is already on a Web-page for downloading.  
> You can get it on:  
> [http://www.ise.fraunhofer.de/german/fields/field6/mb4/index.html](http://www.ise.fraunhofer.de/german/fields/field6/mb4/index.html) then  
> follow link on "Lichtsimulation", then "RADIANCE", then "p-map"
> 
> Good luck!
> 
> Jan
> 
> Erico Rosa wrote:
> 
> I’m running a simulation on hollow mirror lightpipes and I’ve installed  
> the photon map compiled by Carsten Bauer (at  
> \<[http://www.cb-d.de/pmap/pmap.html](http://www.cb-d.de/pmap/pmap.html)\> [http://www.cb-d.de/pmap/pmap.html](http://www.cb-d.de/pmap/pmap.html))  
> for Radiance 3.6. I also downloaded the examples from  
> \<[mailto:ganjatron@gmx.net](mailto:ganjatron@gmx.net)\> Roland Schregle’s webpage (  
> \<[http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html](http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html)\>  
> [http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html](http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html))  
> to run a “test drive”. The Photon Map runs all scripts without any  
> problems until I use the examples with “ports”. It falls into what seems  
> a loop where the progress reports give me an exorbitant 30,000% (it’s  
> still running…). Will it stop eventually?
> 
> Does anybody have worked with the ports option and bumped into this  
> abnormal behaviour?
> 
> Erico  
> erosa@gsd.harvard.edu
> 
> &nbsp;&nbsp;\_\_\_\_\_
> 
> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> Radiance-general mailing list  
> [Radiance-general@radiance-online.org](mailto:Radiance-general@radiance-online.org)  
> [http://www.radiance-online.org/mailman/listinfo/radiance-general](http://www.radiance-online.org/mailman/listinfo/radiance-general)  
> &nbsp;&nbsp;  
> --  
> Dipl.-Ing. Jan Wienold  
> Project Manager  
> Fraunhofer-Institut für Solare Energiesysteme  
> Thermal Systems and Buildings, Lighting and Daylighting  
> Heidenhofstr. 2, 79110 Freiburg, Germany  
> Phone: +49(0)761 4588 5133 Fax:+49(0)761 4588 9133  
> [jan.wienold@ise.fraunhofer.de](mailto:jan.wienold@ise.fraunhofer.de)
> 
> > **[Fraunhofer ISE](https://www.ise.fraunhofer.de/)**
> >
> > Forschen für die Energiewende
> 
> In office:  
> Mo,Tue: 9:00-18:00  
> We-Fr: 8:30-14:00

---

<div class="post-metadata">

**Author:** ![Francesco\_Anselmo3](https://discourse.radiance-online.org/letter_avatar_proxy/v4/letter/f/e480ec/32.png) [@Francesco\_Anselmo3](https://discourse.radiance-online.org/u/Francesco_Anselmo3)\
**Post date:** [January 14, 2006, 10:32pm UTC](https://discourse.radiance-online.org/t/lightpipes-ports/3658/4 "2006-01-14T22:32:15Z")

</div>

Hi Erico

> Thanks for the pointer. I've downloaded the pmap 4.3 version and tried  
> to compile/install (after performing a fresh installation of radiance  
> 3.7), but the pmap installation is unsuccessful.

If you're using linux, you can download the new pmap binaries from this page:  
[http://www.bozzograo.net/radiance/modules.php?op=modload&name=Downloads&file=index&req=viewdownload&cid=4](http://www.bozzograo.net/radiance/modules.php?op=modload&name=Downloads&file=index&req=viewdownload&cid=4)

> **···**
>
> --  
> Francesco

---

<div class="post-metadata">

**Author:** ![Jan\_Wienold1](https://discourse.radiance-online.org/letter_avatar_proxy/v4/letter/j/ecc23a/32.png) [@Jan\_Wienold1](https://discourse.radiance-online.org/u/Jan_Wienold1)\
**Post date:** [January 15, 2006, 9:18am UTC](https://discourse.radiance-online.org/t/lightpipes-ports/3658/5 "2006-01-15T09:18:22Z")

</div>

Hi Erico,

you should use RADIANCE 3.7, Patchlevel 2, which we have put also onto the same page. I just checked it and I could compile it without any problems on my linux machine.

Jan

Erico Rosa wrote:

> **···**
>
> > Hi Jan,
> > 
> > Thanks for the pointer. I've downloaded the pmap 4.3 version and tried to compile/install (after performing a fresh installation of radiance 3.7), but the pmap installation is unsuccessful, with the following error messages being generated by 'makeall install' during the
> > 
> > compilation:
> > 
> > ../lib/libpmap.a(pmapmat.o)(.text+0xf64): In function `anisoSpecPhotonScatter':
> > 
> > : undefined reference to `getacoords'
> > 
> > ../lib/libpmap.a(pmapmat.o)(.text+0x1afb): In function `dielectricPhotonScatter' :
> > 
> > : undefined reference to `mylog'
> > 
> > ../lib/libpmap.a(pmapmat.o)(.text+0x1b26): In function `dielectricPhotonScatter' :
> > 
> > : undefined reference to `mylog'
> > 
> > ../lib/libpmap.a(pmapmat.o)(.text+0x1b51): In function `dielectricPhotonScatter' :
> > 
> > : undefined reference to `mylog'
> > 
> > ../lib/libpmap.a(pmapmat.o)(.text+0x1db1): In function `dielectricPhotonScatter' :
> > 
> > : undefined reference to `mylog'
> > 
> > ../lib/libpmap.a(pmapmat.o)(.text+0x1dd9): In function `dielectricPhotonScatter' :
> > 
> > : undefined reference to `mylog'
> > 
> > ../lib/libpmap.a(pmapmat.o)(.text+0x1e01): more undefined references to `mylog' follow
> > 
> > collect2: ld returned 1 exit status
> > 
> > make: \*\*\* [mkpmap] Error 1
> > 
> > make: Target `install' not remade because of errors. ~/rad3R7/ray/src
> > 
> > Do you have any idea of what might be causing this?
> > 
> > Thanks in advance,
> > 
> > Erico
> > 
> > -----Original Message-----  
> > From: Jan Wienold [mailto:jan.wienold@ise.fraunhofer.de]  
> > Sent: Saturday, January 14, 2006 1:30 AM  
> > To: Radiance general discussion  
> > Subject: Re: [Radiance-general] lightpipes/ports
> > 
> > Hi Erico,
> > 
> > you probably should use the current version of photon-mapping(4.3), which is for the RADIANCE 3.7. Roland made this new version some weeks ago.  
> > I'm not sure, if this helps in your special case, but I never had such problems with using photon-ports and I used it several times without any problems (I always used the 3.28 version for RADIANCE 3.5).
> > 
> > We are actually reorganizing our web-pages and unfortunately the English (web)version is not available and the German version shows a bug in direct linking. That's the reason, why I haven't posted it to the community yet.
> > 
> > Anyhow, it is already on a Web-page for downloading.  
> > You can get it on:  
> > [http://www.ise.fraunhofer.de/german/fields/field6/mb4/index.html](http://www.ise.fraunhofer.de/german/fields/field6/mb4/index.html) then follow link on "Lichtsimulation", then "RADIANCE", then "p-map"
> > 
> > Good luck!
> > 
> > Jan
> > 
> > Erico Rosa wrote:
> > 
> > I'm running a simulation on hollow mirror lightpipes and I've installed the photon map compiled by Carsten Bauer (at [http://www.cb-d.de/pmap/pmap.html\](http://www.cb-d.de/pmap/pmap.html%5C)) for Radiance 3.6. I also downloaded the examples from Roland Schregle \<mailto:ganjatron@gmx.net\>'s webpage ([http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html\](http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html%5C)) to run a "test drive". The Photon Map runs all scripts without any problems until I use the examples with "ports". It falls into what seems a loop where the progress reports give me an exorbitant 30,000% (it's still running...). Will it stop eventually?
> > 
> > Does anybody have worked with the ports option and bumped into this abnormal behaviour?
> > 
> > Erico
> > 
> > erosa@gsd.harvard.edu \<mailto:erosa@gsd.harvard.edu\>
> > 
> > ------------------------------------------------------------------------
> > 
> > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_
> > 
> > Radiance-general mailing list
> > 
> > Radiance-general@radiance-online.org \<mailto:Radiance-general@radiance-online.org\>
> > 
> > [http://www.radiance-online.org/mailman/listinfo/radiance-general](http://www.radiance-online.org/mailman/listinfo/radiance-general)
> > 
> > --
> > 
> > Dipl.-Ing. Jan Wienold
> > 
> > Project Manager
> > 
> > Fraunhofer-Institut f�r Solare Energiesysteme
> > 
> > Thermal Systems and Buildings, Lighting and Daylighting
> > 
> > Heidenhofstr. 2, 79110 Freiburg, Germany
> > 
> > Phone: +49(0)761 4588 5133 Fax:+49(0)761 4588 9133
> > 
> > jan.wienold@ise.fraunhofer.de \<mailto:jan.wienold@ise.fraunhofer.de\>
> > 
> > [http://www.ise.fraunhofer.de](http://www.ise.fraunhofer.de)
> > 
> > In office:
> > 
> > Mo,Tue: 9:00-18:00
> > 
> > We-Fr: 8:30-14:00
> > 
> > ------------------------------------------------------------------------
> > 
> > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > Radiance-general mailing list  
> > Radiance-general@radiance-online.org  
> > [http://www.radiance-online.org/mailman/listinfo/radiance-general](http://www.radiance-online.org/mailman/listinfo/radiance-general)
> 
> --  
> Dipl.-Ing. Jan Wienold  
> Project Manager  
> Fraunhofer-Institut f�r Solare Energiesysteme  
> Thermal Systems and Buildings, Lighting and Daylighting  
> Heidenhofstr. 2, 79110 Freiburg, Germany  
> Phone: +49(0)761 4588 5133 Fax:+49(0)761 4588 9133  
> jan.wienold@ise.fraunhofer.de
> 
> > **[Fraunhofer ISE](https://www.ise.fraunhofer.de/)**
> >
> > Forschen für die Energiewende
> 
> In office: Mo,Tue: 9:00-18:00  
> We-Fr: 8:30-14:00

---

<div class="post-metadata">

**Author:** ![Erico\_Rosa](https://discourse.radiance-online.org/letter_avatar_proxy/v4/letter/e/e79b87/32.png) [@Erico\_Rosa](https://discourse.radiance-online.org/u/Erico_Rosa)\
**Post date:** [January 17, 2006, 7:17pm UTC](https://discourse.radiance-online.org/t/lightpipes-ports/3658/6 "2006-01-17T19:17:17Z")

</div>

Hi Jan and Francesco,

Thanks a bunch! Redhat has collaborated and Pmap 4.3 is running fine  
now.

Erico

> **···**
>
> -----Original Message-----  
> From: [radiance-general-bounces@radiance-online.org](mailto:radiance-general-bounces@radiance-online.org)  
> [[mailto:radiance-general-bounces@radiance-online.org](mailto:radiance-general-bounces@radiance-online.org)] On Behalf Of Jan  
> Wienold  
> Sent: Sunday, January 15, 2006 4:18 AM  
> To: Radiance general discussion  
> Subject: Re: [Radiance-general] lightpipes/ports
> 
> Hi Erico,
> 
> you should use RADIANCE 3.7, Patchlevel 2, which we have put also onto  
> the same page. I just checked it and I could compile it without any  
> problems on my linux machine.
> 
> Jan
> 
> Erico Rosa wrote:
> 
> Hi Jan,
> 
> Thanks for the pointer. I've downloaded the pmap 4.3 version and tried  
> to compile/install (after performing a fresh installation of radiance  
> 3.7), but the pmap installation is unsuccessful, with the following  
> error messages being generated by 'makeall install' during the  
> compilation:
> 
> ../lib/libpmap.a(pmapmat.o)(.text+0xf64): In function  
> `anisoSpecPhotonScatter':  
> : undefined reference to `getacoords'  
> ../lib/libpmap.a(pmapmat.o)(.text+0x1afb): In function  
> `dielectricPhotonScatter' :  
> : undefined reference to `mylog'  
> ../lib/libpmap.a(pmapmat.o)(.text+0x1b26): In function  
> `dielectricPhotonScatter' :  
> : undefined reference to `mylog'  
> ../lib/libpmap.a(pmapmat.o)(.text+0x1b51): In function  
> `dielectricPhotonScatter' :  
> : undefined reference to `mylog'  
> ../lib/libpmap.a(pmapmat.o)(.text+0x1db1): In function  
> `dielectricPhotonScatter' :  
> : undefined reference to `mylog'  
> ../lib/libpmap.a(pmapmat.o)(.text+0x1dd9): In function  
> `dielectricPhotonScatter' :  
> : undefined reference to `mylog'  
> ../lib/libpmap.a(pmapmat.o)(.text+0x1e01): more undefined references to  
> `mylog' follow  
> collect2: ld returned 1 exit status  
> make: \*\*\* [mkpmap] Error 1  
> make: Target `install' not remade because of errors. ~/rad3R7/ray/src
> 
> Do you have any idea of what might be causing this?
> 
> Thanks in advance,
> 
> Erico  
> -----Original Message-----  
> From: Jan Wienold [[mailto:jan.wienold@ise.fraunhofer.de](mailto:jan.wienold@ise.fraunhofer.de)]  
> Sent: Saturday, January 14, 2006 1:30 AM  
> To: Radiance general discussion  
> Subject: Re: [Radiance-general] lightpipes/ports
> 
> Hi Erico,
> 
> you probably should use the current version of photon-mapping(4.3),  
> which is for the RADIANCE 3.7. Roland made this new version some weeks  
> ago.  
> I'm not sure, if this helps in your special case, but I never had such  
> problems with using photon-ports and I used it several times without any  
> problems (I always used the 3.28 version for RADIANCE 3.5).
> 
> We are actually reorganizing our web-pages and unfortunately the English  
> (web)version is not available and the German version shows a bug in  
> direct linking. That's the reason, why I haven't posted it to the  
> community yet.
> 
> Anyhow, it is already on a Web-page for downloading.  
> You can get it on:  
> [http://www.ise.fraunhofer.de/german/fields/field6/mb4/index.html](http://www.ise.fraunhofer.de/german/fields/field6/mb4/index.html) then  
> follow link on "Lichtsimulation", then "RADIANCE", then "p-map"
> 
> Good luck!
> 
> Jan
> 
> Erico Rosa wrote:
> 
> I’m running a simulation on hollow mirror lightpipes and I’ve installed  
> the photon map compiled by Carsten Bauer (at  
> \<[http://www.cb-d.de/pmap/pmap.html](http://www.cb-d.de/pmap/pmap.html)\> [http://www.cb-d.de/pmap/pmap.html](http://www.cb-d.de/pmap/pmap.html))  
> for Radiance 3.6. I also downloaded the examples from  
> \<[mailto:ganjatron@gmx.net](mailto:ganjatron@gmx.net)\> Roland Schregle’s webpage (  
> \<[http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html](http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html)\>  
> [http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html](http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html))  
> to run a “test drive”. The Photon Map runs all scripts without any  
> problems until I use the examples with “ports”. It falls into what seems  
> a loop where the progress reports give me an exorbitant 30,000% (it’s  
> still running…). Will it stop eventually?
> 
> Does anybody have worked with the ports option and bumped into this  
> abnormal behaviour?
> 
> Erico  
> erosa@gsd.harvard.edu
> 
> &nbsp;&nbsp;\_\_\_\_\_
> 
> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> Radiance-general mailing list  
> [Radiance-general@radiance-online.org](mailto:Radiance-general@radiance-online.org)  
> [http://www.radiance-online.org/mailman/listinfo/radiance-general](http://www.radiance-online.org/mailman/listinfo/radiance-general)  
> &nbsp;&nbsp;  
> --  
> Dipl.-Ing. Jan Wienold  
> Project Manager  
> Fraunhofer-Institut für Solare Energiesysteme  
> Thermal Systems and Buildings, Lighting and Daylighting  
> Heidenhofstr. 2, 79110 Freiburg, Germany  
> Phone: +49(0)761 4588 5133 Fax:+49(0)761 4588 9133  
> [jan.wienold@ise.fraunhofer.de](mailto:jan.wienold@ise.fraunhofer.de)
> 
> > **[Fraunhofer ISE](https://www.ise.fraunhofer.de/)**
> >
> > Forschen für die Energiewende
> 
> In office:  
> Mo,Tue: 9:00-18:00  
> We-Fr: 8:30-14:00
> 
> &nbsp;&nbsp;\_\_\_\_\_
> 
> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> Radiance-general mailing list  
> [Radiance-general@radiance-online.org](mailto:Radiance-general@radiance-online.org)  
> [http://www.radiance-online.org/mailman/listinfo/radiance-general](http://www.radiance-online.org/mailman/listinfo/radiance-general)  
> &nbsp;&nbsp;  
> --  
> Dipl.-Ing. Jan Wienold  
> Project Manager  
> Fraunhofer-Institut für Solare Energiesysteme  
> Thermal Systems and Buildings, Lighting and Daylighting  
> Heidenhofstr. 2, 79110 Freiburg, Germany  
> Phone: +49(0)761 4588 5133 Fax:+49(0)761 4588 9133  
> [jan.wienold@ise.fraunhofer.de](mailto:jan.wienold@ise.fraunhofer.de)
> 
> > **[Fraunhofer ISE](https://www.ise.fraunhofer.de/)**
> >
> > Forschen für die Energiewende
> 
> In office:  
> Mo,Tue: 9:00-18:00  
> We-Fr: 8:30-14:00