# Installation problems

**URL:** <https://discourse.radiance-online.org/t/installation-problems/1276>\
**Category:** radiance-general\
**Created:** [January 15, 2008, 1:51pm UTC](https://discourse.radiance-online.org/t/installation-problems/1276 "2008-01-15T13:51:37Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![loscotec](https://discourse.radiance-online.org/letter_avatar_proxy/v4/letter/l/4af34b/32.png) [@loscotec](https://discourse.radiance-online.org/u/loscotec)\
**Post date:** [January 15, 2008, 1:51pm UTC](https://discourse.radiance-online.org/t/installation-problems/1276/1 "2008-01-15T13:51:37Z")

</div>

I don't know what is happening.. could someone help me?

Some time ago, I installed radiance on my pc at home . after troubling a little 'couse of inexperience, I managed doing it, don't remember what did I do to solve it, but as I did not write down anything it should have been novice's things!

Now I'm trying to install it in my laboratory at university.. still in ubuntu.. but something again is not working

so, from the right directory (/home/administrator/Scrivania/ray) I'm launching "sudo ./makeall install" and the result is an huge anount of errors.. beginning with :

Current rmake command is:  
#!/bin/sh  
exec make "SPECIAL=" \  
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;"OPT=-O2" \  
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;"MACH=-Dlinux -D\_FILE\_OFFSET\_BITS=64 -Dfseeko=fseek -L/usr/X11R6/lib -I/usr/include/X11 -DNOSTEREO" \  
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;ARCH=IBMPC "COMPAT=erf.o" \  
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;INSTDIR=/usr/local/bin \  
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;LIBDIR=/usr/local/lib/ray \  
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;ESUFFIX= \  
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;CC=gcc "$@" -f Rmakefile  
Do you want to change it?  
Making programs...  
~/Scrivania/ray/src/common ~/Scrivania/ray/src  
In directory common...  
gcc -Dlinux -D\_FILE\_OFFSET\_BITS=64 -Dfseeko=fseek -L/usr/X11R6/lib -I/usr/include/X11 -DNOSTEREO -O2 -c -o cone.o cone.c  
In file included from standard.h:10,  
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;from cone.c:10:  
rtio.h:9:20: error: stdio.h: Nessun file o directory  
rtio.h:10:24: error: sys/types.h: Nessun file o directory  
rtio.h:11:20: error: fcntl.h: Nessun file o directory  
rtio.h:12:21: error: string.h: Nessun file o directory  
In file included from standard.h:10,  
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;from cone.c:10:  
rtio.h:22: error: expected =, ,, ;, asm or \_\_attribute\_\_ before fdate  
rtio.h:25: error: expected declaration specifiers or ... before FILE  
rtio.h:27: error: expected ) before \* token

and ending after an huge number of lines with :  
histo.c:148: error: stderr undeclared (first use in this function)  
histo.c:157: warning: incompatible implicit declaration of built-in function exit  
histo.c:159: warning: incompatible implicit declaration of built-in function fprintf  
make: \*\*\* [histo.o] Error 1  
make: Target `install' not remade because of errors.  
~/Scrivania/ray/src  
There were some errors.

Any idea on how to solve this problem ?

thank you in advance !!!

Lucio Boscolo

.. Caminante no hay camino, solo se hace camino al andar ..

---

<div class="post-metadata">

**Author:** ![Jack\_de\_Valpine](https://discourse.radiance-online.org/letter_avatar_proxy/v4/letter/j/aca169/32.png) [@Jack\_de\_Valpine](https://discourse.radiance-online.org/u/Jack_de_Valpine)\
**Post date:** [January 15, 2008, 2:14pm UTC](https://discourse.radiance-online.org/t/installation-problems/1276/2 "2008-01-15T14:14:05Z")

</div>

Hi Lucio,

It looks like the server does not have the c development libraries installed since you are getting compile errors relating to fundamental things like stdio.h. You should run the package manager and check if the c libraries are installed.

-Jack

loscotec@libero.it wrote:

> **···**
>
> > I don't know what is happening.. could someone help me?
> > 
> > Some time ago, I installed radiance on my pc at home . after troubling a little 'couse of inexperience, I managed doing it, don't remember what did I do to solve it, but as I did not write down anything it should have been novice's things!
> > 
> > Now I'm trying to install it in my laboratory at university.. still in ubuntu.. but something again is not working
> > 
> > so, from the right directory (/home/administrator/Scrivania/ray) I'm launching "sudo ./makeall install" and the result is an huge anount of errors.. beginning with :
> > 
> > Current rmake command is:  
> > #!/bin/sh  
> > exec make "SPECIAL=" \  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;"OPT=-O2" \  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;"MACH=-Dlinux -D\_FILE\_OFFSET\_BITS=64 -Dfseeko=fseek -L/usr/X11R6/lib -I/usr/include/X11 -DNOSTEREO" \  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;ARCH=IBMPC "COMPAT=erf.o" \  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;INSTDIR=/usr/local/bin \  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;LIBDIR=/usr/local/lib/ray \  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;ESUFFIX= \  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;CC=gcc "$@" -f Rmakefile  
> > Do you want to change it? Making programs...  
> > ~/Scrivania/ray/src/common ~/Scrivania/ray/src In directory common...  
> > gcc -Dlinux -D\_FILE\_OFFSET\_BITS=64 -Dfseeko=fseek -L/usr/X11R6/lib -I/usr/include/X11 -DNOSTEREO -O2 -c -o cone.o cone.c  
> > In file included from standard.h:10,  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;from cone.c:10:  
> > rtio.h:9:20: error: stdio.h: Nessun file o directory  
> > rtio.h:10:24: error: sys/types.h: Nessun file o directory  
> > rtio.h:11:20: error: fcntl.h: Nessun file o directory  
> > rtio.h:12:21: error: string.h: Nessun file o directory  
> > In file included from standard.h:10,  
> > &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;from cone.c:10:  
> > rtio.h:22: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘\_\_attribute\_\_’ before ‘fdate’  
> > rtio.h:25: error: expected declaration specifiers or ‘...’ before ‘FILE’  
> > rtio.h:27: error: expected ‘)’ before ‘\*’ token
> > 
> > and ending after an huge number of lines with : histo.c:148: error: ‘stderr’ undeclared (first use in this function)  
> > histo.c:157: warning: incompatible implicit declaration of built-in function ‘exit’  
> > histo.c:159: warning: incompatible implicit declaration of built-in function ‘fprintf’  
> > make: \*\*\* [histo.o] Error 1  
> > make: Target `install' not remade because of errors.  
> > ~/Scrivania/ray/src There were some errors.
> > 
> > Any idea on how to solve this problem ?
> > 
> > thank you in advance !!!
> > 
> > Lucio Boscolo
> > 
> > .. Caminante no hay camino, solo se hace camino al andar ..
> > 
> > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > Radiance-general mailing list  
> > Radiance-general@radiance-online.org  
> > [http://www.radiance-online.org/mailman/listinfo/radiance-general](http://www.radiance-online.org/mailman/listinfo/radiance-general)
> 
> --  
> # Jack de Valpine  
> # president  
> #  
> # visarc incorporated  
> # [http://www.visarc.com](http://www.visarc.com)  
> #  
> # channeling technology for superior design and construction

---

<div class="post-metadata">

**Author:** ![loscotec](https://discourse.radiance-online.org/letter_avatar_proxy/v4/letter/l/4af34b/32.png) [@loscotec](https://discourse.radiance-online.org/u/loscotec)\
**Post date:** [January 15, 2008, 2:26pm UTC](https://discourse.radiance-online.org/t/installation-problems/1276/3 "2008-01-15T14:26:27Z")

</div>

Thank you very much for the fast reply Jack! That's probable.. but..

How to know which libraries to look for and install ?

Lucio

.Hi Lucio,  
.  
.It looks like the server does not have the c development libraries  
.installed since you are getting compile errors relating to fundamental  
.things like stdio.h. You should run the package manager and check if the  
.c libraries are installed.  
.  
.-Jack  
.

> **···**
>
> .loscotec@libero.it wrote:  
> .\> I don't know what is happening.. could someone help me?  
> .\>  
> .\> Some time ago, I installed radiance on my pc at home . after troubling a little 'couse of inexperience, I managed doing it, don't remember what did I do to solve it, but as I did not write down anything it should have been novice's things!  
> .\>  
> .\> Now I'm trying to install it in my laboratory at university.. still in ubuntu.. but something again is not working  
> .\>  
> .\> so, from the right directory (/home/administrator/Scrivania/ray) I'm launching "sudo ./makeall install" and the result is an huge anount of errors.. beginning with :  
> .\>  
> .\> Current rmake command is:  
> .\> #!/bin/sh  
> .\> exec make "SPECIAL=" \  
> .\> "OPT=-O2" \  
> .\> "MACH=-Dlinux -D\_FILE\_OFFSET\_BITS=64 -Dfseeko=fseek -L/usr/X11R6/lib -I/usr/include/X11 -DNOSTEREO" \  
> .\> ARCH=IBMPC "COMPAT=erf.o" \  
> .\> INSTDIR=/usr/local/bin \  
> .\> LIBDIR=/usr/local/lib/ray \  
> .\> ESUFFIX= \  
> .\> CC=gcc "$@" -f Rmakefile  
> .\> Do you want to change it?  
> .\> Making programs...  
> .\> ~/Scrivania/ray/src/common ~/Scrivania/ray/src  
> .\> In directory common...  
> .\> gcc -Dlinux -D\_FILE\_OFFSET\_BITS=64 -Dfseeko=fseek -L/usr/X11R6/lib -I/usr/include/X11 -DNOSTEREO -O2 -c -o cone.o cone.c  
> .\> In file included from standard.h:10,  
> .\> from cone.c:10:  
> .\> rtio.h:9:20: error: stdio.h: Nessun file o directory  
> .\> rtio.h:10:24: error: sys/types.h: Nessun file o directory  
> .\> rtio.h:11:20: error: fcntl.h: Nessun file o directory  
> .\> rtio.h:12:21: error: string.h: Nessun file o directory  
> .\> In file included from standard.h:10,  
> .\> from cone.c:10:  
> .\> rtio.h:22: error: expected `=´, `,´, `;´, `asm´ or ` __attribute__ ´ before `fdate´  
> .\> rtio.h:25: error: expected declaration specifiers or `...´ before `FILE´  
> .\> rtio.h:27: error: expected `)´ before `\*´ token  
> .\>  
> .\>  
> .\> and ending after an huge number of lines with :  
> .\> histo.c:148: error: `stderr´ undeclared (first use in this function)  
> .\> histo.c:157: warning: incompatible implicit declaration of built-in function `exit´  
> .\> histo.c:159: warning: incompatible implicit declaration of built-in function `fprintf´  
> .\> make: \*\*\* [histo.o] Error 1  
> .\> make: Target `install' not remade because of errors.  
> .\> ~/Scrivania/ray/src  
> .\> There were some errors.  
> .\>  
> .\>  
> .\> Any idea on how to solve this problem ?  
> .\>  
> .\>  
> .\> thank you in advance !!!  
> .\>  
> .\> Lucio Boscolo  
> .\>  
> .\> .. Caminante no hay camino, solo se hace camino al andar ..  
> .\>  
> .\>  
> .\> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> .\> Radiance-general mailing list  
> .\> [Radiance-general@radiance-online.org](mailto:Radiance-general@radiance-online.org)  
> .\> [http://www.radiance-online.org/mailman/listinfo/radiance-general](http://www.radiance-online.org/mailman/listinfo/radiance-general)  
> .\>  
> .\>  
> .  
> .--  
> .# Jack de Valpine  
> .# president  
> .#  
> .# visarc incorporated  
> .# [http://www.visarc.com](http://www.visarc.com)  
> .#  
> .# channeling technology for superior design and construction  
> .  
> .  
> .\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> .Radiance-general mailing list  
> [.Radiance-general@radiance-online.org](mailto:.Radiance-general@radiance-online.org)  
> .[http://www.radiance-online.org/mailman/listinfo/radiance-general](http://www.radiance-online.org/mailman/listinfo/radiance-general)  
> .
> 
> .. Caminante no hay camino, solo se hace camino al andar ..

---

<div class="post-metadata">

**Author:** ![loscotec](https://discourse.radiance-online.org/letter_avatar_proxy/v4/letter/l/4af34b/32.png) [@loscotec](https://discourse.radiance-online.org/u/loscotec)\
**Post date:** [January 15, 2008, 2:58pm UTC](https://discourse.radiance-online.org/t/installation-problems/1276/4 "2008-01-15T14:58:20Z")

</div>

Installing some random libraries, looks like something has changed, but still errors:

the firs error lines are now:

In directory common...  
gcc -Dlinux -D\_FILE\_OFFSET\_BITS=64 -Dfseeko=fseek -L/usr/X11R6/lib -I/usr/include/X11 -DNOSTEREO -O2 -c -o cone.o cone.c  
In file included from rtio.h:9,  
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;from standard.h:10,  
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;from cone.c:10:  
/usr/include/stdio.h:686: error: conflicting types for fseek  
/usr/include/stdio.h:654: error: previous declaration of fseek was here  
make: \*\*\* [cone.o] Error 1

before were :

In file included from standard.h:10,  
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;from cone.c:10:  
rtio.h:9:20: error: stdio.h: Nessun file o directory  
rtio.h:10:24: error: sys/types.h: Nessun file o directory  
rtio.h:11:20: error: fcntl.h: Nessun file o directory

What's happening now ?

Lucio

.Hi Lucio,  
.  
.It looks like the server does not have the c development libraries  
.installed since you are getting compile errors relating to fundamental  
.things like stdio.h. You should run the package manager and check if the  
.c libraries are installed.  
.  
.-Jack  
.

> **···**
>
> .loscotec@libero.it wrote:  
> .\> I don't know what is happening.. could someone help me?  
> .\>  
> .\> Some time ago, I installed radiance on my pc at home . after troubling a little 'couse of inexperience, I managed doing it, don't remember what did I do to solve it, but as I did not write down anything it should have been novice's things!  
> .\>  
> .\> Now I'm trying to install it in my laboratory at university.. still in ubuntu.. but something again is not working  
> .\>  
> .\> so, from the right directory (/home/administrator/Scrivania/ray) I'm launching "sudo ./makeall install" and the result is an huge anount of errors.. beginning with :  
> .\>  
> .\> Current rmake command is:  
> .\> #!/bin/sh  
> .\> exec make "SPECIAL=" \  
> .\> "OPT=-O2" \  
> .\> "MACH=-Dlinux -D\_FILE\_OFFSET\_BITS=64 -Dfseeko=fseek -L/usr/X11R6/lib -I/usr/include/X11 -DNOSTEREO" \  
> .\> ARCH=IBMPC "COMPAT=erf.o" \  
> .\> INSTDIR=/usr/local/bin \  
> .\> LIBDIR=/usr/local/lib/ray \  
> .\> ESUFFIX= \  
> .\> CC=gcc "$@" -f Rmakefile  
> .\> Do you want to change it?  
> .\> Making programs...  
> .\> ~/Scrivania/ray/src/common ~/Scrivania/ray/src  
> .\> In directory common...  
> .\> gcc -Dlinux -D\_FILE\_OFFSET\_BITS=64 -Dfseeko=fseek -L/usr/X11R6/lib -I/usr/include/X11 -DNOSTEREO -O2 -c -o cone.o cone.c  
> .\> In file included from standard.h:10,  
> .\> from cone.c:10:  
> .\> rtio.h:9:20: error: stdio.h: Nessun file o directory  
> .\> rtio.h:10:24: error: sys/types.h: Nessun file o directory  
> .\> rtio.h:11:20: error: fcntl.h: Nessun file o directory  
> .\> rtio.h:12:21: error: string.h: Nessun file o directory  
> .\> In file included from standard.h:10,  
> .\> from cone.c:10:  
> .\> rtio.h:22: error: expected `=´, `,´, `;´, `asm´ or ` __attribute__ ´ before `fdate´  
> .\> rtio.h:25: error: expected declaration specifiers or `...´ before `FILE´  
> .\> rtio.h:27: error: expected `)´ before `\*´ token  
> .\>  
> .\>  
> .\> and ending after an huge number of lines with :  
> .\> histo.c:148: error: `stderr´ undeclared (first use in this function)  
> .\> histo.c:157: warning: incompatible implicit declaration of built-in function `exit´  
> .\> histo.c:159: warning: incompatible implicit declaration of built-in function `fprintf´  
> .\> make: \*\*\* [histo.o] Error 1  
> .\> make: Target `install' not remade because of errors.  
> .\> ~/Scrivania/ray/src  
> .\> There were some errors.  
> .\>  
> .\>  
> .\> Any idea on how to solve this problem ?  
> .\>  
> .\>  
> .\> thank you in advance !!!  
> .\>  
> .\> Lucio Boscolo  
> .\>  
> .\> .. Caminante no hay camino, solo se hace camino al andar ..  
> .\>  
> .\>  
> .\> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> .\> Radiance-general mailing list  
> .\> [Radiance-general@radiance-online.org](mailto:Radiance-general@radiance-online.org)  
> .\> [http://www.radiance-online.org/mailman/listinfo/radiance-general](http://www.radiance-online.org/mailman/listinfo/radiance-general)  
> .\>  
> .\>  
> .  
> .--  
> .# Jack de Valpine  
> .# president  
> .#  
> .# visarc incorporated  
> .# [http://www.visarc.com](http://www.visarc.com)  
> .#  
> .# channeling technology for superior design and construction  
> .  
> .  
> .\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> .Radiance-general mailing list  
> [.Radiance-general@radiance-online.org](mailto:.Radiance-general@radiance-online.org)  
> .[http://www.radiance-online.org/mailman/listinfo/radiance-general](http://www.radiance-online.org/mailman/listinfo/radiance-general)  
> .
> 
> .. Caminante no hay camino, solo se hace camino al andar ..

---

<div class="post-metadata">

**Author:** ![Jack\_de\_Valpine](https://discourse.radiance-online.org/letter_avatar_proxy/v4/letter/j/aca169/32.png) [@Jack\_de\_Valpine](https://discourse.radiance-online.org/u/Jack_de_Valpine)\
**Post date:** [January 15, 2008, 3:21pm UTC](https://discourse.radiance-online.org/t/installation-problems/1276/5 "2008-01-15T15:21:06Z")

</div>

Hi Lucio,

If the machine is not yours to do with as you please, I would suggest contacting your system administrator.

Under ubuntu you can use the package manager. You can search for libc6 and libc6-dev to see if they are installed. Alternatively you could just download compiled binaries and see if they work.

Alternatively, you can check for compiled binaries at

&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;www.radiance-online.org

additionally it looks like there is a radiance package available for the latest Ubuntu (I assume via the recent efforts to include radiance in Debian by Bernd Zeimetz) at:

&nbsp;&nbsp;&nbsp;&nbsp;[Ubuntu – Error](http://packages.ubuntu.com/hardy/graphics/radiance)

-Jack

loscotec@libero.it wrote:

> **···**
>
> > Thank you very much for the fast reply Jack! That's probable.. but..
> > 
> > How to know which libraries to look for and install ?
> > 
> > Lucio
> > 
> > .Hi Lucio,  
> > .  
> > .It looks like the server does not have the c development libraries .installed since you are getting compile errors relating to fundamental .things like stdio.h. You should run the package manager and check if the .c libraries are installed.  
> > .  
> > .-Jack  
> > .  
> > .loscotec@libero.it wrote:  
> > .\> I don't know what is happening.. could someone help me?  
> > .\>  
> > .\> Some time ago, I installed radiance on my pc at home . after troubling a little 'couse of inexperience, I managed doing it, don't remember what did I do to solve it, but as I did not write down anything it should have been novice's things!  
> > .\>  
> > .\> Now I'm trying to install it in my laboratory at university.. still in ubuntu.. but something again is not working  
> > .\>  
> > .\> so, from the right directory (/home/administrator/Scrivania/ray) I'm launching "sudo ./makeall install" and the result is an huge anount of errors.. beginning with :  
> > .\>  
> > .\> Current rmake command is:  
> > .\> #!/bin/sh  
> > .\> exec make "SPECIAL=" \  
> > .\> "OPT=-O2" \  
> > .\> "MACH=-Dlinux -D\_FILE\_OFFSET\_BITS=64 -Dfseeko=fseek -L/usr/X11R6/lib -I/usr/include/X11 -DNOSTEREO" \  
> > .\> ARCH=IBMPC "COMPAT=erf.o" \  
> > .\> INSTDIR=/usr/local/bin \  
> > .\> LIBDIR=/usr/local/lib/ray \  
> > .\> ESUFFIX= \  
> > .\> CC=gcc "$@" -f Rmakefile  
> > .\> Do you want to change it? .\> Making programs...  
> > .\> ~/Scrivania/ray/src/common ~/Scrivania/ray/src .\> In directory common...  
> > .\> gcc -Dlinux -D\_FILE\_OFFSET\_BITS=64 -Dfseeko=fseek -L/usr/X11R6/lib -I/usr/include/X11 -DNOSTEREO -O2 -c -o cone.o cone.c  
> > .\> In file included from standard.h:10,  
> > .\> from cone.c:10:  
> > .\> rtio.h:9:20: error: stdio.h: Nessun file o directory  
> > .\> rtio.h:10:24: error: sys/types.h: Nessun file o directory  
> > .\> rtio.h:11:20: error: fcntl.h: Nessun file o directory  
> > .\> rtio.h:12:21: error: string.h: Nessun file o directory  
> > .\> In file included from standard.h:10,  
> > .\> from cone.c:10:  
> > .\> rtio.h:22: error: expected `=´, `,´, `;´, `asm´ or ` __attribute__ ´ before `fdate´  
> > .\> rtio.h:25: error: expected declaration specifiers or `...´ before `FILE´  
> > .\> rtio.h:27: error: expected `)´ before `\*´ token  
> > .\>  
> > .\> and ending after an huge number of lines with : .\> histo.c:148: error: `stderr´ undeclared (first use in this function)  
> > .\> histo.c:157: warning: incompatible implicit declaration of built-in function `exit´  
> > .\> histo.c:159: warning: incompatible implicit declaration of built-in function `fprintf´  
> > .\> make: \*\*\* [histo.o] Error 1  
> > .\> make: Target `install' not remade because of errors.  
> > .\> ~/Scrivania/ray/src .\> There were some errors.  
> > .\>  
> > .\> Any idea on how to solve this problem ?  
> > .\>  
> > .\> thank you in advance !!! .\>  
> > .\> Lucio Boscolo .\>  
> > .\> .. Caminante no hay camino, solo se hace camino al andar .. .\>  
> > .\>  
> > .\> \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > .\> Radiance-general mailing list  
> > .\> Radiance-general@radiance-online.org  
> > .\> [http://www.radiance-online.org/mailman/listinfo/radiance-general](http://www.radiance-online.org/mailman/listinfo/radiance-general)  
> > .\>  
> > .\> .  
> > .-- .# Jack de Valpine  
> > .# president  
> > .#  
> > .# visarc incorporated  
> > .# [http://www.visarc.com](http://www.visarc.com)  
> > .#  
> > .# channeling technology for superior design and construction  
> > .  
> > .\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > .Radiance-general mailing list  
> > .Radiance-general@radiance-online.org  
> > .[http://www.radiance-online.org/mailman/listinfo/radiance-general](http://www.radiance-online.org/mailman/listinfo/radiance-general)  
> > .
> > 
> > .. Caminante no hay camino, solo se hace camino al andar ..
> > 
> > \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
> > Radiance-general mailing list  
> > Radiance-general@radiance-online.org  
> > [http://www.radiance-online.org/mailman/listinfo/radiance-general](http://www.radiance-online.org/mailman/listinfo/radiance-general)
> 
> --  
> # Jack de Valpine  
> # president  
> #  
> # visarc incorporated  
> # [http://www.visarc.com](http://www.visarc.com)  
> #  
> # channeling technology for superior design and construction

---

<div class="post-metadata">

**Author:** ![Lars\_Grobe](https://discourse.radiance-online.org/user_avatar/discourse.radiance-online.org/lars_grobe/32/469_2.png) [@Lars\_Grobe](https://discourse.radiance-online.org/u/Lars_Grobe)\
**Post date:** [January 15, 2008, 3:17pm UTC](https://discourse.radiance-online.org/t/installation-problems/1276/6 "2008-01-15T15:17:32Z")

</div>

Did you make an "makeall clean" after installing the libs?

Lars.

---

<div class="post-metadata">

**Author:** ![Pueltz\_Gunter](https://discourse.radiance-online.org/letter_avatar_proxy/v4/letter/p/e480ec/32.png) [@Pueltz\_Gunter](https://discourse.radiance-online.org/u/Pueltz_Gunter)\
**Post date:** [June 16, 2010, 7:08am UTC](https://discourse.radiance-online.org/t/installation-problems/1276/7 "2010-06-16T07:08:22Z")

</div>

Dear RADIANCE-specialists,

after downloading the source codes (rad4R0all.tar.gz) from the original  
LBNL-website we unpacked the files und ran the install script by the command  
./makeall install. But something must have gone wrong, because after the  
installation we are missing some important moduls (e.g. pfilt, ximage,  
ta\_tiff, etc.), see attached output of the install-script.

Can us anyone tell what´s going wrong during installation ?

Regards,  
Gunter

[makeall\_install\_20100615T1358.out](https://discourse.radiance-online.org/uploads/default/original/1X/a404d3d3c51e6866010377972a92ec5ae5a41670.out) (75 KB)

> **···**
>
> --  
> Dr. Gunter Pültz
> 
> Müller-BBM GmbH  
> Robert-Koch-Straße 11  
> 82152 Planegg  
> Telefon +49(89)85602-336  
> Telefax +49(89)85602-111  
> E-Mail [Gunter.Pueltz@MuellerBBM.de](mailto:Gunter.Pueltz@MuellerBBM.de)  
> [http://www.MuellerBBM.de](http://www.MuellerBBM.de)
> 
> HRB München 86143  
> Geschäftsführer: Bernd Grözinger, Dr. Edwin Schorer, Norbert Suritsch

---

<div class="post-metadata">

**Author:** ![Greg\_Ward](https://discourse.radiance-online.org/user_avatar/discourse.radiance-online.org/greg_ward/32/471_2.png) [@Greg\_Ward](https://discourse.radiance-online.org/u/Greg_Ward)\
**Post date:** [June 16, 2010, 3:32pm UTC](https://discourse.radiance-online.org/t/installation-problems/1276/8 "2010-06-16T15:32:51Z")

</div>

Hi Gunter,

The usual reason that the binaries from the src/px directory fail to install is because the TIFF library isn't building properly. Unfortunately, there are many reasons why this might happen, and debugging it is beyond my abilities. You'll just have to remove ra\_tiff and normtiff from the PROGS= list in src/px/Rmakefile and rerun "rmake install" there.

Cheers,  
-Greg

> **···**
>
> > From: "Pueltz, Gunter" \<Gunter.Pueltz@MuellerBBM.de\>  
> > Date: June 16, 2010 12:08:22 AM PDT
> > 
> > Dear RADIANCE-specialists,
> > 
> > after downloading the source codes (rad4R0all.tar.gz) from the original  
> > LBNL-website we unpacked the files und ran the install script by the command  
> > ./makeall install. But something must have gone wrong, because after the  
> > installation we are missing some important moduls (e.g. pfilt, ximage,  
> > ta\_tiff, etc.), see attached output of the install-script.
> > 
> > Can us anyone tell what´s going wrong during installation ?
> > 
> > Regards,  
> > Gunter
> > 
> > --  
> > Dr. Gunter Pültz
